Warthog whr switcher sewer jetting nozzle

Medium Lines 6-18in./152-457mm


WHR Magnum​    WH-1/2 & WH-3/4    WHP-3/4

The WHR Switcher is two tools in one. Switch between pulling or cleaning without removing the nozzle from the pipe. When the pump is idled down and brought back to pressure, the tool will switch the water flow between two different sets of jets.

The WHR Switcher features the same technology as the WGR Switcher for 3/4" inlets.


Features

  • Eliminates extra runs needed to swap nozzles, saving water and time
  • Excellent for longer runs, climbing hills, going against the flow and flushing large amounts of material without affecting residential infrastructure
  • Run more jobs with one tank of water
  • Switch to pulling jets for maximum thrust
  • Switch to cleaning jets maximize power for cutting roots annd clearing debris


Specifications
Tool Family                                       Warthog Switcher
Tool Model                                        WHR Switcher
Pipe Size                                          6-18 in. 152-457 cm
Pressure Range                               1500–8k psi 100–550 bar
Flow Range                                      14-50 gpm 60-190 l/min
Flow Rating                                      2.6 Cv
Inlet Connection                               3/4 NPT or BSPP
Nozzle Ports                                     5 x 1/8 NPT
Diameter                                          3.625 in. 92 mm
Length                                              8.26 in. 210 mm
Weight                                              7.48 lb 3.4 kg


Large Lines 8-36in./203-914mm


WGR Switcher       WGR Magnum     WG-1     WGP-1 (Puller)     WD 1-1/4

Small Lines 2-4in./51-152mm


WV-1/4     WT-3/8-C     WS-1/2